BGFNZ - TYPE 442-3M VRC TONER, 78-6969-0333-1
- MSDS: BGFNZ
- Manufacturer: HARRIS 3M FACSIMILE PRODUCTS DIV
- Product Name: TYPE 442-3M VRC TONER, 78-6969-0333-1
- National Stock Number: 6850-01-025-8564
Product Identification
Product ID:TYPE 442-3M VRC TONER, 78-6969-0333-1
MSDS Date:11/01/1985
FSC:6850
NIIN:01-025-8564
MSDS Number: BGFNZ
Responsible Party
ATLANTA, GA 30345
Emergency Phone: 404-496-9500
Cage: MO603
Contractor
Telephone: 770-723-4208
Cage: 76974
Ingredients
EPOXY RESIN - BISPHENOL A TYPE,MOLECULAR WT >1000
CAS: 35068-38-6
Fraction By Weight: 50-75.0%
VINYL TOLUENE/BUTADIENE COPOLYMER
Fraction By Weight: 5-20.0%
MAGNETITE (DUST)
CAS: 1309-38-2
RTECS: OM4800000
Fraction By Weight: 10-30.0%
ORGANIC DYE
Fraction By Weight: 1.0-10%
Hazards
LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMP OF OVEREXPOS
Explanation of Carcinogenicity:N/K
Effects of Overexposure:EYES:NO ADVERSE HEALTH EFFECTS ARE EXPECTED.NO
EYE IRRIT IN LAB ANIMALS.SKIN:NO ADVERSE EFFECTS EXPECTED.NO IRRIT
OR SENSIT IN LAB ANIMALS.INHAL:DUST MAY CAUSE RESP SYS
IRRIT.INGEST:NO ADVERSE EFFECTS EXPECTED. PROD WAS PRACTICALLY
NON-TOXIC WHEN TESTED IN LAB ANIMALS.
Medical Cond Aggravated by Exposure:N/K
First Aid
First Aid:INGEST:CALL MD IMMEDIATELY .INHAL:IF RESP IRRIT OR OTHER
SYMPTOMS OCCUR,MOVE TO FRESH AIR.EYES:FLUSH WITH PLENTY OF H*2O FOR
@ LEAST 15 MIN
Fire Fighting
Extinguishing Media:WATER,FOAM,CARBON DIOXIDE
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIP .AVOID STRAIGHT STREAM OF WATER WHICH MAY CAUSE POWDER TO
BECOME AIRBORNE.
Unusual Fire/Explosion Hazard:TONER DUST CLOUD CAN CREATE AN EXPLOSION
HAZ.THERMAL DECOMP MAY RELEASE:CO*2,CO,SHORT CHAIN HYDROCARBONS &
CARBON PARTICULATES.
Accidental Release
Spill Release Procedures:OBSERVE PRECAUTIONARY INFORMATION FROM OTHER
SECTIONS.VACUUM,USING WET SWEEPING COMPOUND OR WATER TO AVOID
DUSTING.
Neutralizing Agent:N/K
Handling
Handling and Storage Precautions:STORE BELOW 95F,35C OR POWDER MAY
BECOME LUMPY.
Other Precautions:AVOID PROLONGED BREATHING OF DUST.AVOID SPARKS OR
FLAME WHEN ADDING TONER TO HOPPER.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:VENTILATION APPROPRIATE FOR CONDITION OF USE.CONSULT
INDUSTRIAL HYGIENIST/SAFETY SPECIALIST FOR SPECIFIC GUIADANCE
Protective Gloves:N/K
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:N/K
Work Hygienic Practices:N/K
Supplemental Safety and Health
N/K
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Spec Gravity:>1 (WATER=1)
Solubility in Water:NIL
Appearance and Odor:FINE BLACK POWDER,SLIGHT ODOR
Percent Volatiles by Volume:NIL
Stability
Stability Indicator/Materials to Avoid:YES
NONE UNDER NORMAL USE.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON DIOXIDE,CARBON MONOXIDE,SHORT
CHAIN HYDROCARBONS AND CARBON PARTICULATES IF BURNED.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE & LOCAL REGULATIONS .DISPOSE OF WASTE PRODUCT IN A
SANITARY LANDFILL IN ACCORDANCE WITH APPLICABLE REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.